Idiomas disponibles
Idiomas disponibles
D. Making detailed settings
The following settings cannot be edited from the PD 12 itself, so you'll need to use the Jammin Pro Control
Editor. You can download the Jammin Por Kontrol Editor from the Jammin Pro website.
(http://www.jamminpro.net/)
1. Global MIDI channel [1...16]
Set this to match the MIDI channel of the application that you're controlling.
Transport MIDI Channel [1...16/Global MIDI Channel]
Specifies the MIDI channel on which MIDI messages will be transmitted when you operate the transport
button. Set this to match the MIDI channel of the MIDI application you're controlling.
If you set this to "Global MIDI Channel," the message will be transmitted on the Global MIDI Channel.
2. Transport buttons
Operating the transport buttons will transmit either control change messages or MMC messages, depending
on the assign type.
For each of these six buttons, you can specify the message that is assigned, the way in which the button will
operate when pressed, the control change number, or an MMC command.
Assign Type [Control Change/MMC/No Assign]
Specifies the type of message assigned to the transport button.
You can specify that the button be disabled, or assign a control change message or MMC message.
Button Behavior [Momentary/Toggle]
Selects one of two types of behavior for the button.
Momentary – A control change message with a value of 127 will be transmitted when you press the transport
button, and with a value of 0 when you release the button.
Toggle – Each time you press the transport button, a control change message with a value of 127 or 0 will be
transmitted alternately.
You can't specify the button behavior if the assign type is "MMC." If you've specified "MMC," an MMC
command will be transmitted each time you press the button.
Control Change Number [0...127]
Specifies the control change number of the control change message that is transmitted.
MMC Command [Stop/Play .../MMC Reset]
Selects one of the following thirteen types of MMC command as the MMC message that will be transmitted.
Stop, Play, Deferred Play, Fast Forward, Rewind, Record Strobe, Record Exit, Record Pause, Pause, Eject,
Chase, Command Error Reset, MMC Reset
MMC Device ID [0...127]
Specifies the device ID of the MMC message.
Normally you will specify 127. If the device ID is 127, all devices will receive the MMC message.
3. MOD Button 1 / 2
Operating a button will transmit either a control change message or a note message, depending on the
Assign Type you've specified.
You can specify the message assigned to each button, the way in which the button will operate when
pressed, the control change number, the note number and the value transmitted when the button is turned
on/off.
Assign Type [No Assign/Control Change/Note]
Specifies the message assigned to the slider. You can choose disabled, control change message, or note
3
