Idiomas disponibles
Idiomas disponibles
EN
1
2.2 Camera Placement ( on the wall )
04
Step 2
Press
Step 3
The factory default camera and the parent unit are paired, if there is
no pairing phenomenon, or you need to add a new camera,
please follow the steps below to add.
2
3
4
Long Press OK button to unbid
Step 4
Set the parent unit to prepare for connecting.
Step 1
Put the camera at the pre-installation angle, then viewing from the display
monitor, check if the angle is OK Using positioning card included, punch
two holes horizontally apart with the same separation as the installation
holes at the bottom of the camera.
for 2 seconds to turn on the parent unit.
