Idiomas disponibles
Idiomas disponibles
8) Do not allow processed material to build up in the discharge zone; this may prevent
proper discharge and can result in kickback of material through the feed intake
opening;
9) If the machine becomes clogged, shut-off the power source and disconnect from
supply before clearing debris. Keep the power source clear of debris and other
accumulations to prevent damage to the powered source or possible fire.
Remember that operating the starting mechanism on engine powered machines will
still cause the cutting means to move;
10) Keep all guards and deflectors in place and in good working condition;
11) Do not transport this machine while the power source is running;
12) Shut off the power source and disconnect from supply whenever you leave the work
area;
13) Do not tilt the machine while the power source is running.
14) To keep extension cords away from the shredding means. The shredding means can
cause damage to the cords and lead to contact with live parts.
15) If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
16) This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety. Children should be supervised to
ensure that they do not play with the appliance.
Maintenance and storage
1) When the machine is stopped for servicing, inspection, or storage, or to change an
accessory, shut off the power source, disconnect from supply, make sure that all
moving parts have come to a complete stop and, where a key is fitted remove the
key. Allow the machine to cool before making any inspections, adjustments, etc.
2) Always allow the machine to cool before storing;
3) When servicing the cutting means be aware that, even though the power source will
not start due to the interlock feature of the guard, the cutting means can still be
moved by a manual starting mechanism.
4) Keep the motor cooling vents clean of debris and other accumulations to prevent
damage to the motor or possible fire.
5) If an extension cord is used it shall not be of lighter grade than the supply cord
already fitted to the appliance.
6) Check the supply and any extension cord regularly for damage or signs of ageing.
Do not use the appliance, if the cords are damaged.
7) Never attempt to override the interlock feature of the guarding.
SAFETY ADVICE & INSTRUCTIONS
WARNING! When using electric garden tools basic safety precautions, should always
be followed to reduce the risk of fire, electric shock and personal injury.
IMPORTANT-Safety, Health and Environment
Safe use of our power tool is only possible after the following safety and operating
instructions have been fully read and observed.
Read all these instructions before operating this product and keep these instructions
for future reference.
Follow the checklist below, before attempting to use the machine.
1. The sheathing of the flex in the plug or socket is securely gripped under the cord
grip.
2. There is no damage to the sheath of the extension lead.
3. The cable is run out safely to avoid damage or accidental tripping.
4. The lead is fully unwound from the reel to avoid overheating.
3
EN
