Matikgate HULK Manual De Usuario/Instalador página 55

P8 - SOFT START SETTING
EN
NOTE: Only available in single phase mode.
To soften the impact on the door caused by the engine starting, you can use this function
to start the engine at low speed.
Note:
1. This function is disabled by factory default.
2. If the door is too heavy, it might make the motor can't be started that open this
function.
Setup steps:
Power on.
Press and hold (SET - located on the board) until appears on the display "P--1".
Press seven times, until appears on the screen "P--8".
Press once, to enter the soft start setting.
"ON" or "OFF" appears on the screen.
Press or button to toggle between "ON" (soft start active) and "OFF"
(soft start inactive).
Press to save and exit, "----" appears on the screen.
55
MATIKGATE AUTOMATION