Idiomas disponibles
Idiomas disponibles
HOW TO USE: Unfold the panel and align to the sun. It is recommended to prop the kickstand of the first panel before
unfolding the next panel. Prop that panel before unfolding the next panel again. Ensure that no part of the panel is in the
shade. Connect the output cable (APP
begin charging.
USB CHARGING: The solar panel has the capability to supply regulated 5V output through the USB-A port. Connect your
device that charges via USB-A (5V) to the USB-A Port.
SOLAR PANEL PLACEMENT: Place the solar panel flat on the ground, or utilizing the kickstand(s) on the reverse side,
raise the panel to point toward the sun for improved solar charging capability.
NOTE – The solar panel will generate the optimal power output when the panel is directly facing the sun.
The power output module has four power output indicators
power. The panels are in an optimal position when the four indicators are illuminated. It is only possible to illuminate all four
indicators when the device is connected to a load capable of drawing more than 150W of continuous power.
NOTE – Regardless of panel positioning, if a load draws less than 50W (including no load), only one indicator will
illuminate. If a load draws from 51W-100W of continuous power, only two indicators will illuminate.
CHAINING: Connecting additional Klein Tools solar panels (Cat. No. 29251 200W, 29250 60W) is allowable using the
input port (APP
compatible connector). If pairing a Cat. No. 29250 60W panel with a Cat. No. 29251 200W panel, it is
®
recommended to connect the output of the 60W panel to the input of the 200W panel to get maximum power out of the
pair. The input connector is unregulated, allowing a direct pass-through of power from the additional solar panel to the
output port.
NOTE – If connecting to a non-Klein Tools system through the MC4 adapter kit (29215 - Sold separately), confirm first
that the inputs and outputs of the other system are within spec of the solar panel.
See this product's page at www.kleintools.com for FCC compliance information. Canada ICES-003 (B) / NMB-003 (B)
Do not place equipment and its accessories in the trash. Items must be properly disposed of in accordance
with local regulations. Please see www.epa.gov/recycle for additional information.
4
OPERATING INSTRUCTIONS
Compatible Connector) to the charging port of the portable power station and
®
9
FCC AND IC COMPLIANCE
WARRANTY
www.kleintools.com/warranty
DISPOSAL / RECYCLE
CUSTOMER SERVICE
KLEIN TOOLS, INC.
450 Bond Street, Lincolnshire, IL 60069
1-800-553-4876
www.kleintools.com
APP is a registered trademark of Anderson Power Products, Inc.
that may be used to help position the panel to deliver optimal
