Idiomas disponibles
Idiomas disponibles
Read these instructions
and this manual
in
its entirety
before you attempt
to assemble
or operate
your new lawn mower.
IMPORTANT:
This lawn mower is shipped
WITHOUT
OIL OR GASOLINE
in the
engine,
Your new lawn mower
has been as-
sembled
at the factory
with the excep-
tion of those parts left unassembled
for
shipping
purposes.
To ensure
safe and
proper operation
of your lawn mower,
all
parts and hardware
you assemble
must be
tightened
securely.
Use the correct
tools
as necessary
to ensure
proper tightness°
All parts such as nuts, washers,
bolts, etc°,
necessary
to complete
the assembly
have
been placed
in the parts bag.
TO REMOVE
MOWER
FROM
CARTON
1. Remove
loose parts included
with
mower.
2.
Cut down two end corners
of carton
and lay end panel down flat.
3.
Remove
all packing
materials
except
padding
between
upper and lower
handle and padding
holding operator
presence
control bar to upper handle.
4.
Roll lawn mower out of carton and
check carton thoroughly
for additional
loose parts.
HOW TO SET UP YOUR MOWER
TO UNFOLD
HANDLE
IMPORTANT:
Unfold handle carefully so
as not to pinch or damage
control cables.
1. Raise handles until lower handle sec-
tion locks into place in mowing
position°
2,
Remove protective
padding,
raise up-
per handle section into place on lower
handle and tighten both handle knobs_
3.
Remove
handle padding
holding
operator
presence
control bar to upper
handle.
Your lawn mower handle can be adjusted
for your mowing comfort.
Refer to "AD-
JUST
HANDLE"
in the Service
and Adjust-
ments section
of this manual.
Operator
MOWING
presence
POSITION
control bar
".*._
UP
//
,1
t
rt /
Upper
handle
Handle
knob
Lower handle
TO INSTALL
ATTACHMENTS
Your lawn mower was shipped
ready to
be used as a mulcher.
To convert to bag-
ging or discharging,
see "TO CONVERT
MOWER"
in the Operation
section
of this
manual
6
