Cleaning And Maintenance - Hema 80.06.0003 Instrucciones De Uso

6. Timer: Press TIMER button "
the set time has elapsed, the fan will be off and under standby condition.
7. Cooling: press COOL button "
again the button to cancel the function.
Note: Please make sure there is enough water in the water tank, otherwise there will be no cooling effect.

CLEANING AND MAINTENANCE

Unplug the appliance during filling and cleaning.

Clean the honeycomb filter (2) and filter cover (1)
1. Unplug the appliance.
2. Unscrew the screw which is in the middle of the filter cover, then
take off the filter cover.
3. Take out of the honeycomb filter.
4. Rinse the filter and filter cover under water to wash away the dust.
5. Put back in place after cleaning. If you will not use the appliance
immediately after cleaning, please dry them before putting back.
Note: After long time operation, the filter becomes clogged with dust
and dirt, which will greatly affect the performance of the appliance. It is
recommended to clean the filter frequently.

Clean the water tank
After some time operation, the water tank may have dust and dirt. It is recommended to change water and
clean the water tank with a clean cloth frequently.

Clean the main body
1. Unplug the appliance.
2. For slight dirt, wipe it off with a soft damp cloth. For greasy dirt, squeeze a little mild detergent on a soft
damp cloth, then wipe the dirt off.
3. Let the main body dry completely before next use.
Environment
In compliance with the directives on Waste Electrical and Electronic Equipment, this product must not be
discarded with domestic waste but should be disposed of separately for recycling. If you wish to dispose of this
product in the future, do NOT throw it away with the household rubbish but hand it in at a specially
designated place, such as your municipal domestic chemical waste depot.
Never throw empty batteries away, but deposit them in special battery boxes or hand them in as domestic
chemical waste at your municipal depot.
Quality
Safety and quality is very important to HEMA. We have our own laboratory, which assesses all equipment in
terms of electrical safety and ease of use, before it is included in our range. HEMA also monitors the product
quality in collaboration with the manufacturer.
" to set your desired working time from 1h →2h →3h ... →8h →off. When
" to start the cooling function. The indicator "COOL" will be on. Press
- 24 -