COMEM TWM Serie Manual De Instrucciones página 5

Electrical connection
CAUTION
Qualified and skilled personnel trained in the applicable health
and safety regulations of the relevant country should only per-
form electrical connections.
WARNING
Dangerous electrical voltages!!!
It is imperative to deactivate the power supply during wiring of
the device.
CAUTION
During the terminal box assembly, use caution not to damage the
gasket. If this occurs, it must be substituted.
If you do not use all the cable glands, pay attention to close the
free cable gland with a plug with gasket.
Figure 1
To connect and set the micro switches, follow the
instructions:
1. Remove the cover from the device unscrewing the n.4
fixing screws (fig. 1)
2. Insert the cables inside the device through the cable
gland positioned in the right side of the device (fig. 2/1)
3. Connect the cables on the contacts through the
terminal block in fig. 2/2
4. In order to set the contacts, keep the disc (fig. 2/3)
and move the indicators of the contacts (fig. 2/4) at the
desired operation temperature
5. Close the cover with the related screws, paying
attention on the correct positioning of the sealing
gasket.
During the cover removal, pay attention to not damage the or
gasket. If this occurs, it must be replaced.
3
4
Figure 2
1
CAUTION
1
2
5