TP-Link CPE605 V1 Guia De Instalacion página 10

English
■ Mounting the Device on the Wall (for the product with mounting brackets)
Mount the mounting bracket to the
preferred position in the wall� Push and
slide the device to lock it into place� Then
connect the antennas to the device�
2� Install the waterproof seal� (For certain devices)
Before installing, fit the Ethernet cable through
the spiral cover, bracket, and O-ring� Then follow
the steps as shown in the picture:
(1) Connect the Ethernet cable to the port�
(2) Fit the O-Ring to the head of the bracket, and
screw the bracket to the body of the device.
(3) Fit the Ethernet cable through the seal's slit
with the thicker side towards the bracket�
(4) Plug the seal to the bracket�
(5) Screw the spiral cover to the bracket�
1
2
8
O-Ring
Bracket
4
Seal
3
5
Spiral Cover