Manual Preset - Brigmton BT-251-B-N Manual De Instrucciones

AUTOMATIC PRESELECTION
1. Press and hold PROGRAM until the display frequency starts.

MANUAL PRESET

1. Select the waveband and tune to the desired station (See TUNING).
2. Press PROGRAM once to enter the programming mode.
3. Press PRESET + or PRESET - to select the desired memory location.
4. Press PROGRAM again to confirm the selected station.
5. To listen to a preset station, select the band and press PRESET + or
PRESET - to select the desired station.
To improve reception: For FM, remove the telescopic antenna. To improve
FM reception tilt and rotate the antenna, shorten its length if the FM
signal is too strong (very close to a transmitter).
VOLUME
Adjust the sound with the VOLUME + or VOLUME -
You can connect the 3.5mm headphones to the PHONES jack. The speaker
will be muted.
USB / MICRO SD CARD
Tese inputs can decide and playa MP3 files Storey en a USB device or a
Micro SD card.
1. Select FUNCTION MP3.
2. Before connecting the USB to the drive, make sure the port is in the
correct direction. Or insert a MICRO SD card directly.
3. The system will automatically start reading the MP3 files en the USB
storage medium or MICRO SD Card.
4. Press the USB MICRO SD PREVIOUS / PLAY / NEXT buttons.
If you incorrectly connect the USB storage medium or the MICRO SD card
upside down, you may damage the unit or the USB storage medium or the