Idiomas disponibles
Idiomas disponibles
To Set the Print Time Format
Select the Print Time Format by choosing the
number on the display which corresponds to the
desired format (listed below). As each format
number is shown on the display, the number of
printed character positions used is shown in the
upper right-corner of the display. The total num-
ber of characters used for printing is shown in the
lower left-corner of the display.
Line Format
0. No Print
1. 12 hour, minutes
2. 12 hour, tenths
3. 12 hour, hundredths
4. 12 hour, minutes, seconds
5. 24 hour, minutes
6. 24 hour, tenths
7. 24 hour, hundredths
8. 24 hour, minutes, seconds
A. Remove the cover and press the CHANGE button once (refer to page 8 for parts location).
B. Press ACCEPT five times until the programming arrow appears below TIME.
C. Press CHANGE once.
• The currently set TIME option begins to flash. Using the examples above, choose a print
time format.
Press the CHANGE button until the desired option number is displayed.
D. Press ACCEPT to set the PRINT TIME FORMAT option shown on the display.
• The programming arrow moves to the Print Comment option. To modify that option, pro-
ceed to step C of the next section. To exit programming at this point, hold ACCEPT down
while the programming arrow cycles through all the options.
D A T E
T I M E
17
12 / 24
H O U R
Total Characters Used for Printing
Print
—
2:47
PM
2.8
PM
2.78
PM
2:47:45
PM
14:47
14.8
14.78
14:47:45
PROGRAMMING
Number of Characters Used for this Selection
08
1
Number of
Characters
0
7
6
7
10
5
4
5
8
15
