Kenmore 116.35922 Manual Del Propietário página 12

Extend the wand to its full length, Turn the
locking ring to the LOCK position, Attach
the wand onto the open end of the hose°
Suction
Control Slide
Wand
Align the tabs on the wand with the "J"
slots in the hose. Push the wand into the
hose and twist to the right to lock,
Raised
Tab
Suction
Control
Wand
Tool
To achieve maximum reach with the
attachments, add the crevice tool to the
end of the wand by inserting and twisting
slightly.
The combination brush can be attached
directly to the wand,
Brush
Brush-._ _.
Holder
Use the brush holder without the brush for
greater suction on furniture cushions or
stairs. Use brush holder with brush for
cleaning loose surfaces such as drapes,
,_k'_. \Hose Attach floor brush directly to
. extension wand.
_\ "\,_-/-- Teles;opic
Extension _. \\
Wand _.k
Floor _
Brush _J
Use the floor brush for cleaning of floors
or stairs,
TO OPERATE SUCTION
CONTROL SLIDE
Telescopic Wand
When using attachments for cleaning
draperies, small rugs with iow pile and
other delicate items, twist the suction con-
trol slide to the open position. This slide is
located on the telescopic wand, close to
the hose.
Suction
Control
This will reduce
suction for ease of
cleaning,
Note: Return suction control slide to the
closed position for normal cleaning.
CAUTION
When using attachments, be careful
not to overextend the stretch hose
when reaching.Trying to reach beyond
the hose stretch capability could cause
the vacuum cleaner to tip over,
12