Amplicomms TCL 350 Instrucciones De Uso página 25

To stop and reset the alarm
When alarm is sounding, the corresponding alarm indicator
flashes. Press AL SET/SELECT once to stop the alarm and
reset it to come on the following day. After that, the
corresponding alarm indicator stays on the display.
To use snooze
When alarm is sounding, press once, the alarm will
be stopped temporarily and the corresponding alarm indicator
keeps flashing. Alarm will come on again after the set snooze
duration is over.
To use the HI-LO-OFF dimmer
There is a 3-level brightness control for the LED display. Press
to adjust the brightness (HI / LO / OFF) of the LCD
display. This can only be done when the unit is not sounding.
To use the demo mode
Press and hold the L/DEMO button for 2 seconds to trigger
the buzzer, stroke light and shaker.
Helpline UK 0844 800 6503
22
(See chapter "Helpline" for costs and hours of operation)