Kenmore 580.53301 Manual Del Propietário página 8

Idiomas disponibles

Idiomas disponibles

1, Pull out the bucket cover.
• Placethumb at position _) and
pull outward.Placeother hand at
position (_ and pull up.
I. Empty the bucket manually.
2. Cleaninside of bucket with
brush or dampenedcloth.
• We recommendusing a mild
detergentsolution.
Blush
of
3.
Replacethe bucketcover.
• Makesuretabs (_and _are
placedas shown.
2.
Attach a length of garden hose to the threaded bucket drain
hose connection to carry water to the orein,
When the bucket is full, pull out
and empty it into a large sink or tub
and then replace it properly.
• Do not overtighten the hose when
connecting it to the bucket. Use a
rubber washer and tighten by
hand firmly without stripping the
plastic threads.
• Be careful while taking out the
bucket as it can cause damage.
• Please do not shake strongly
when you carry the bucket. It can
cause to breakage of the handle
or bucket cover.
It is advisable to carry the bucket
by supporting it from the bottom.
The bucket has a threaded hose
• When being attached to the
connection which can be left open.
bucket drain hose connection, be
Drill a 1/4" (6.4 ram) hole in the
sure the hose doesn't kink or
center of the hose connection,
bend. It should lie flat from the
Once opened, the hose connection
dehumidifier to the drain.
will continually drain water from the • The hose attachment will accept a
bucket.
• The nozzle cannot be fixed after
puncture. Use an ordinary garden
hose cap to reclose if necessary.
• When inserting the bucket into the
unit. lifting up the bottom tip of the
bucket lightly makes insertion
easily.
standard garden hose filling. You
can attach a screw-on cap to use
the bucket without a hose.
-8-
loading