Idiomas disponibles
Idiomas disponibles
EN
Video output
There is a video output port beside the USB interface on the
side of the thermal imager.
The screen image of the thermal imager can be output to an
external monitor through the matching HDMI video cable. There
are two display modes, either the external screen or the screen
of the device, but only one mode is active.
NOTE - When HDMI is used to connect the external display
screen, the real-time screen can only be viewed via the exter-
nal display. When the HDMI cable is unplugged, the internal
screen of the device is restored.
50
STORAGE AND MAINTENANCE
When the thermal imager will be not used for a long time, store
in a dry, well-ventilated environment and charge the unit at least
four hours every two months during the storageThe infrared
lens of the thermal imager is coated with an anti-reflection film.
Clean the lens only when dirt or smudges are present.
Frequent scrubbing may damage the lens coating.
To clean non-optical surfaces of the thermal imager, do not
scrub with chemical solvents or cleaners. On exterior surfaces,
wipe with a soft and dry microfiber cloth.
WARRANTY
The Steiner thermal products are covered by the Steiner 2 year
warranty and Steiner will repair or replace your product if it is
defective. Do not disassemble the thermal imager as this will
void the warranty. Contact your nearest Steiner dealer for as-
sistance.
EN
51
