Idiomas disponibles
Idiomas disponibles
3. Use
1. Put the mains plug in an earthed wall socket.
2. Turn the Temperature Controller Knob to proper temperature
3. Turn the Timer to for preheating. After this, the device is ready for use.
4. When the time to 0, carefully pull the fry pot out of the appliance, place the
ingredients inside the fry tray (Attention: do not exceed the maximum line); slide the
pan back to the appliance. Do not touch the pan during and some time after use, as
it gets very hot. Only hold the pan by the handle.
5. Set the timer to the proper cooking time; then the appliance start to work
6. When you hear the timer bell, the set preparation time has elapsed. Pull the pot out
of appliance and place it on a heat-resistant surface.
7. Check if the ingredients are ready. If the ingredients are not ready yet, simply slide
the pan back into the appliance and set the timer to a few extra minutes.
8. If the ingredient ready, carefully pull out the pan to remove the ingredients.Don not
turn the pan upside down, as any excess oil that has collected on the bottom of the
pan will leak onto the ingredients.
9. Empty the pan into a bowl or onto a plate. When a batch of ingredients is ready, the
appliance is instantly ready for preparing another batch.
10. Tips:
Add some oil on the ingredients for a crispy result.
Shaking ingredients halfway during the preparation time optimize the end result and
can help prevent unevenly fried ingredients. To shake the ingredients, pull the pan
out of the appliance by the handle and shake it. Then slide the pan back into the
appliance.
4. Care and Maintenance
1. Before cleaning, turn the timer to 0, unplug the appliance and waiting for the
17
EVVO TASTY FRYER 6L
