Idiomas disponibles
Idiomas disponibles
TOROLL TRACTOR O FF SKID(See
Operation sectionfor locationand
function
of controls)
1. Raise attachment lift lever to its highest
position.
2. Release parking brake by depressing
clutch/brake pedal.
3. Place freewheel control in "transmission
disengaged position" (See "TO TRANS-
PORT" in the Operation section of this
manual),
4. Roll tractor forward off skid,
5, Remove banding holding the deflector
shield up against tractor,
Continue with the instructions that follow.
CHECK TIRE PRESSURE
The tires on your tractorwere overinflated at
the factory for shipping purposes. Correct
tire pressure is important for best cutting
performance.
• Reduce tire pressure to PSI shown on
tires.
CHECK DECK LEVELNESS
For best cutting results, mower housing
should be properly leveled. See "TO LEVEL
MOWER" in the Service and Adjustments
section of this manual.
CHECK FOR PROPER POSITION OF
ALL BELTS
See the figures that are shown for replacing
motion and mower blade drive belts in the
ServiceandAdjustments sectionofthis man-
ual. Verify' that the belts are muted correctly.
CHECK BRAKE SYSTEM
After you learn how to operate your tractor,
check to see that the brake is operating
properly. See "TO CHECK BRAKE" in the
Service and Adjustments section of this
manual.
CHECKLIST
Before
you operate
your new
tractor, we
wish to assure
that you receive
the best
performance
and satisfaction
from
this
Quality Product.
Please review the following
checklist:
v ( All assembly
instructions
have
been
completed,
J" No remaining
loose parts in carton.
J" Batteryis properlypreparedandcharged.
Seat is adjusted
comfortably
and tight-
ened securely,
v/" Atl tires are properly inflated.
(For ship-
ping purposes, the tires were overinflated
at the factory).
tf
Be sure mower deck is properly
leveled
side-to-sideifront-to-rear
for best cutting
results.
(Tires must be properly inflated
for leveling),
v( Check mower and drive belts.
Be sure
they are routed properly
around pulleys
and inside all belt keepers.
Vf Check wiring.
See that all connections
are still secure
and wires are properly
clamped.
t_ Before driving tractor, be sure freewheel
control
is in "transmission
engaged"
position
(see "TO TRANSPORT"
in the
Operation
section of this manual),
While learning howto use yourtractor, pay ex-
tra attentionto the following important items:
t_. Engine oil is at proper level.
Fueltank isfilled with fresh, clean, regular
unleaded gasoline.
_" Become familiar with all controls, their
location and function.
Operate them
before you start the engine.
i/'
Be sure brake system is insafe operating
condition.
__J'_B_esure O perator £resence System and.....
Reverse Operation System (ROS) are
working properly (Seethe Operation and
Maintenance sections in this manual).
vf It is importantto purge the transmission
before operating your tractor for the
first time.
Follow proper starting and
transmission purging instructions (See
"TO START ENGINE" and "PURGE
TRANSMISSION" in the Operation sec-
tion of this manual),
.........
•
....
8
•
•
