BEFORE PLAYBACK
-
HOLD switch +
0
Release the HOLD switch before pIayback:
+@
When not using the unit, set the HOLD switch to the
HOLD position.Accidentally
pressed
button will not
function.
+0
If buttons are pressed when the HOLD switch is set to
HOLD position, "HOLd" flashes in the display.
Turning on and off+@
Turning the power on
Press>ll
PLAY/PAUSE.
Power
is turned
on and
playback starts.
Turning off the power
If no new operation is made after 30 seconds from the
end
of last
operation,
the
power
is turned
off
automatically.
(Auto power off function)
You can turn off the power before it is automatically
turned
off
by pressing the
STOP/OFF/CHARGE,
Standby mode + @
When an operation finishes, the unit goes into standby
mode until the auto power off function automatically turns
off the power.
To enter standby mode, press
11PLAY/PAUSE to start
playback, then press HSTOP/OFF/CHARGE.
Adjusting the sound +
0
Volume
Turn the VOL control to adjust the volume,
DSL
Set the DSL switch for more powerful sound and deeper
bass.
1:
Deep bass is emphasized,
2:
Deep bass is more emphasized.
OFF: Normal sound
Inserting a disc+@
1 Slide OPEN to open the disc compartment.
2
Place a disc in the center with the label side facing
up.
3
Close the compartment.
To remove the disc+
O
Pick up the disc holding its edge, while pressing the pivot
gently.
