Idiomas disponibles
Idiomas disponibles
After powering on, if the red light on the host flashes continuously for 30
seconds, it indicates that the host is connecting to WIFI. If the host is not
connected within 30 seconds, it will no longer flash. If the host is connected to
WIFI within 30 seconds, the blue light will stay on for 5 seconds, prompting the
user. The host has been connected to WIFI.
3.2 Host shutdown
When the host is powered on, press and hold the 3S lock button. The host will
make a beep sound and the LED red light will light up once. Then release the
lock button, and the host will report the APP-host shutdown prompt
information, and at the same time, the LED indicator will flash red 3 times
quickly. And it emits three beeps. At this time, the host completes the
shutdown operation.
3.3 Host button settings
1) Short press the [
host needs to play (the host will play the selected music for user confirma-
tion);
2) Short press the[
(when arming, the host beeps once and the LED light flashes once; when
disarmed, the host makes two beeps, beeps and the LED light flashes twice;
when left behind to arm, the host "beeps" , beep, beep" three times, the LED
light flashes three times)
Long press the [
3) Short press the [
(the volume will be automatically adjusted to the maximum every time the
host is powered off and on again): When the host is connected to WIFI, short
press the[
] key . First, the blue light flashes once and a "bee" sound is
heard (when the volume is at the maximum or minimum volume, the host first
flashes a blue light twice and makes a "bee" sound), and then plays a prompt
tone.
When the host is not connected to WIFI, when you short press the[
the host will flash a red light once and make a beep sound (at maximum or
minimum volume, the host will flash a red light twice and make a beep sound),
and then play a prompt sound. .
4) Long press the[
5) Host charging/power-off: When the USB is charging/power-off, the host
will make a beep sound, the LED red light will flash once, and the APP will
push the " AC power connection"/"AC power disconnection" message; (the host
is charging, indicating The light shows blue; when fully charged, the indicator
light shows green)
3.4 Total Clean /Half Clean Settings
Semi-total clearing: When the host is turned off, long press the[
[
] key to turn it on, wait for the continuous slow-paced "beep" sound and
the LED indicator yellow light to flash 5 times, until the rapid "beep" sound and
the LED indicator light flash quickly. Release the button, the host and the APP
are unbound, the device is in the armed state, the learned accessories are not
deleted, the track is restored to the first song, the volume is the maximum, and
the host is restored to the factory state.
] configuration key: select the music track that the
] key: switch the host's arming and disarming state
] key: the host shuts down
] key: Set the volume of the music played by the host
] key: enter the WIFI configuration state.
04
] key,
] key and
