Spring PROFESSIONAL Manual Del Usuario página 17

5.1 Installation site requirements
- Only place the warming tray on stable, level and heat-resistant surfaces. Keep the device out of the reach of
children.
- Do not place the warming tray next to or on hot surfaces (heating elements, hot stoves or other heat sources).
Make sure that there is enough space next to and above the warming tray.
- Keep a safe distance from flammable materials such as napkins, tablecloths, etc.
- Make sure that the power cord and/or any extension cord used does not come into contact with hot surfaces
on the appliance or cookware, other hot surfaces, such as cook tops or hot liquids. Ensure that it does not run
over sharp edges and is not pinched or kinked.
- Also make sure that the power cord and/or any extension cord used are routed to the appliance so that they
do not hang down and no one can trip over them or accidentally get caught or pull down the appliance.
5.2 Before the first use
- Read the instructions and safety guidelines carefully before using the device.
- Remove all packaging materials.
- Make sure that all parts are present as described in chapter 7 Scope of delivery and in proper condition.
- Wipe off the warming tray with a soft cloth, slightly damp, if necessary and dry it off thoroughly.
- Do not use any sharp or pointed objects, gasoline, solvent, scrubbing brushes, or abrasive cleaning agents
for cleaning.
5.3 Use
- Position the warming tray on a sturdy, level and heat-resistant surface. Make sure that it is always secure and
rests level on all four feet.
- Plug the power cord into a suitable socket.
- To keep warm hot dishes, switch on the appliance. The control lamp lights up. Allow the appliance to preheat
for about 8 - 10 minutes. Then place the cookware/serving dish carefully on the glass ceramic surface.
- For preheating serving dishes place them on the warming tray before you switch on the appliance.
Caution !
Do not subject the glass ceramic surface to temperature shocks. Only place cold cookware/serving
plates on the cold plate. Only place hot cookware/serving plates on the preheated plate.
- Only place the cookware/serving dish on the glass ceramic surface carefully. Do not slide it, instead lift it up
and set it down in the desired position. Make sure that you do not slide e.g. a casserole when portioning and
taking out the food. This will prevent scratching and potential damage to the surface.
- Make sure that the cookware/serving dish rests securely on the warming tray and does not protrude over the
side of the glass ceramic surface.
- After use, switch off the appliance and remove the cookware/serving dish from the warming tray. If necessary,
use heat-resistant gloves and place the cookware/serving dish only on surfaces that are not sensitive to heat.
- Always pull out the power cord and allow the appliance to cool down completely after each use.
17