Tabla de contenido
Idiomas disponibles
Idiomas disponibles
SECTION
2. GETTING
READY
TO SEW
Connecting
the Power
Supply
1. Turn the power switch OFF.
2. Insert the foot control plug into the machine
socket.
3. Insert the machine
plug into the machine
socket.
4. Insert the power supply plug into the outlet.
5. Turn the power switch ON.
8. The LED display wilt show "01" (straight
stitch)
after one second.
_
Power switch
_
Foot controll
plug
_
Machine
socket
_
Machine
plug
_
Power supply plug
_
Outlet
Before
Using
Your
Sewing
Machine:::::::
Before usingyoursewing machine
place a piece
of waste
fabric
foot and run the machine
with _d
for a
minutes.
Wipe
away
any oil_
_mayappe_
* While in
sewing
.....
as the thre_
ta_e-up lever,
* Always tu¢
_i_e
power swit _and
unplug from
the power
....
-- When
machi_
attended.
-- When att
_pa
rts.
-- When
*
Do not place anyihi_
_ t_e foot control when not
sewing.
Controlling
Sewing Speed
Speed control
lever:
You can set the maximum
sewing speed by the speed
control lever.
_ Slide the lever to the right for higher speed.
_
Slide the lever to the left for slower speed.
Foot Controller
Model 21249 is used with Sewing
Machine
Model 385.19110.xxx
(xxx represents
numbers
000 through
999).
Foot control:
Sewing speed is varied by the foot control.
The harder you depress the foot control, the faster the
machine
runs.
CAUTION:
Do not place anything
on the foot control when the
machine
is not in use.
Polarized
Plug
This appliance
has a polarized
plug (one blade wider
than the other). To reduce the risk of an electric
shock, this plug is intended
to fit in a polarized
outlet
only one way. If the plug does not fit in the outlet,
reverse the plug. If it still does not fit, contact a
qualified
electrician
to install the proper outlet.
Do not
modify the plug in any way.
( (
_
Tabla de contenido
