Tabla de contenido
CHARGING THE BOOMSTREAM MINI
Note: the BOOMSTREAM
MINI will need to be fully
charged prior to initial use (approx. 3.5 hours).
1.
Connect the micro-USB end of the charge
cable to the micro-USB port on the
(Figure 1, "A").
2. Connect the USB end of the charge cable to the
USB port of a computer or AC adapter (not included).
3.
The LED indicator (Figure 1, "B") will turn solid RED
while charging and will turn BLUE when fully charged.
CHARGEMENT DU BOOMSTREAM MINI
Remarque : Le BOOMSTREAM
MINI ne sera
pas entièrement chargé
avant la première utilisation (env. 3,5 heures).
1. Branchez l'extrémité micro-USB du câble
de charge au port micro-USB sur le
BOOMSTREAM mini (Figure 1, « A »).
2.
Branchez l'extrémité USB du cable de
charge au port USB d'un ordinateur ou d'un
adaptateur CA (non inclus).
3. Le témoin lumineux DEL (Figure 1, « B »)
deviendra rouge continu lors du chargement
et bleu lorsque le chargement sera terminé.
FIGURE 1
FIGURA 1
RECARGA DEL boomSTREAM mini
Nota: el BOOMSTREAM
MINI debe estar
completamente cargado antes de su uso inicial
oo
3,5 horas).
Conecte el extremo micro-USB del
cable de carga a la entrada micro-USB del
BOOMSTREAM MINI (Figura 1, "A").
2.
Conecte el extremo USB del cable de
carga al puerto USB de una computadora
o de un cargador de CA (no incluido).
3.
El LED indicador (Figura 1, "B") se
encenderá en ROJO sólido mientras
esté cargando,
y AZUL al terminar la carga.
USING THE BOOMSTREAM MINI
Pairing
1.
Make sure Bluetooth is turned on in your device's settings.
2.
Turn on BOOMSTREAM
MINI speaker. The speaker
will automatically search for devices after 5 seconds.
The LED indicator will flash BLUE once every
second while in search mode.
3. In your device's Bluetooth menu search for and select
"SCOSCHE BTSPK3".
4.
When pairing is completed, the LED will flash quickly and an
audio tone will sound. While connected the LED will continue to flash
BLUE 3 times, every 3 seconds.
FIGURE 2
FIGURA 2
Note: The speaker will automatically pair with the most recently paired available device.
Button Functions:
Multifunction Button:
Play/Pause: Press once to begin or pause playback.
Track Forward: Press 2 times; Track Backward: Press 3 times
Pairing: Hold for 3 seconds then release the button to go into pairing mode. Press and hold
to disconnect Bluetooth
Volume (-): Press or hold to reduce volume (and audio tone will signal minimum volume).
Volume (+): Press or hold to increase volume (an audio tone will signal maximum volume).
Tabla de contenido
