Craftsman 917.986960 Manual De Instrucciones página 19

Idiomas disponibles

Idiomas disponibles

TROUBLESHOOTING
CHART:
See appropriate
section in manual
unless directed to Sears service center
CAUSE
CORRECTION
PROBLEM
Will not start
Hard to start
1.
Out of fuel.
2.
Engine
not "CHOKED"
properly.
3.
Engine
flooded.
4.
Dirty air cleaner.
5.
Water
in fuel.
.
7.
8.
9.
10.
1.
2.
3.
4.
5.
6.
.
2.
3.
4.
Clogged
fuel tank.
Loose spark plug wire.
Loss of power
Bad spark
plug or
improper
gap.
Carburetor
out of adjust-
ment.
Oil soaked
air filter.
Throttle
control
not set
properly.
Dirty air
cleaner.
Bad spark
plug or
improper
gap.
Stale or dirty fuel.
Loose
spark
plug wire.
Carburetor
out of adjust-
ment.
Engine
is overloaded.
Dirty air cleaner.
Low oil level/dirty
oil.
Faulty
spark
plug.
5.
Oil in fuel.
6.
Stale or dirty fuel.
7.
Water
in fuel.
8.
Clogged
fuel tank.
9.
Spark
plug wire loose.
10.
Dirty engine
air screen.
11.
Dirty/clogged
muffler.
12.
Carburetor
out of adjuts-
ment.
13.
Poor compression.
,
2.
3.
4.
5.
.
7.
8.
9.
10.
1.
2.
3.
4.
5.
6.
Fill fuel tank.
See "TO START
ENGINE"
in
the Operation
section.
Wait several
minutes
before
attempting
to start.
Clean
or replace
aircleaner
cartridge.
Empty
fuel tank and carbure-
tor, and refill tank with fresh
gasoline.
Remove
fuel tank and clean.
Make sure spark
plug wire is
seated
properly
on plug.
Replace
spark
plug or adjust
gap.
Make
necessary
adjust
ments.
Replace
air filter.
Place throttle control in
"FAST"
position.
Clean or replace air cleaner
cartridge.
Replace spark plug or adjust
gap.
Empty fuel tank and refill tank
with fresh, clean gasoline.
Make sure spark plug wire is
seated properly on plug.
Make necessary adjust
ments.
1.
Set depth
stake
and wheels
for shallower
tilling.
2.
Clean
or replace
aircleaner
cartridge.
3.
Check
oil level/change
oil.
4.
Clean
and regap
or change
spark
plug.
5.
Empty
and clean
fuel tank
and refill,
and clean
carbure
tot.
6.
Emptyfuel
tank and refilltank
with fresh,
clean
gasoline.
7.
Empty
fuel tank and carbure-
tor, and refill tank with fresh
gasoline.
8.
Remove
fuel tank and clean.
9.
Connect
and tighten
spark
plug wire.
10.
Clean
engine
air screen.
11.
Clean/replace
muffler.
12.
Make
necessary
adjust-
ments.
13.
Contact
a Sears
or other
qualified
service
center.
19
loading