Idiomas disponibles
Idiomas disponibles
Only operate the device when it is fully
assembled!
Do not insert the battery into the device until
it is fully assembled!
4. Before first use
• Remove the device and all additional
parts out of the packaging.
• Check all parts for damage in transit
and do not use a damaged device.
• Keep packaging materials out of reach
of children. There is risk of suffocation!
5. Assembly – Using as leaf blower
Line up the slot (B1) on the inside of the
5.1
blow tube (1) with the ridge (B2) of the
housing opening as shown. Make sure
the blow tube is properly locked. (See
Fig. B).
Make sure the battery is fully loaded.
5.2
For detailed information read and
observe the instruction manuals of the
rechargeable battery and charger.
Insert the battery straight into the
5.3
recess of the device and push the
battery up to the end until you hear a
click sound.
To remove the battery, first depress the
5.4
unlocking button and pull out straight
from the device. Do not force the
battery when inserting into the device
or removing.
6. ON/OFF trigger
To switch the machine on, turn the
6.1
variable speed dial (3) to [1/2/3/4/MAX]
to turn on and to increase air speed.
To switch the machine off, turn the
6.2
variable speed dial to [0].
7. Hints on correct working
technique
• WARNING! Only operate the device
when the blowing tube properly
assembled. There is risk of injury!
• Hold the device firmly in your hand. The
leaf blower is designed for one-hand
operation. The device can be operated
with the right or the left hand.
• Angle the device forwards slightly, and
walk forwards slowly.
• Sweep the machine to the right and left
in order to blow away the leaves.
• Never work against the wind to ensure
that you and persons behind you are
not soiled.
• Always make sure to have a safe stand
while working with the device.
• Do not overload the device during work.
Do not block the blower outlet and the
suction inlet while working with the
device.
• Make sure long hair or loose clothing
cannot get into the openings of the
device.
• In dusty locations, it is advisable to
slightly dampen the surface with a
suitable spraying device to avoid too
much dust.
• In case of stubborn soiling, it is
advisable to loosen the surface with a
rake or broom.
• After operation, remove the battery
from the device to avoid unintentional
switching on.
English
7
