Idiomas disponibles
Idiomas disponibles
TROUBLE SHOOTING
WARNING: Read instruction manual first! Remove battery pack before making adjustments
or assembling accessories.
Symptom
Machine turns on but it
does not draw any
water or there is not
sufficient pressure.
Multi-spray
nozzle leaks.
Outlet pressure
increases suddenly.
Machine drains out
water after
stopping.
Soap accessory
cannot spray out
any detergent.
Machine does
not start.
Machine pressure
is not consistent.
Machine stops
automatically.
Possible causes
Hose filter is blocked.
The users garden hose is not
well connected to the
machine.
Hose adapter looses.
The filter screen is
missing.
The filter screen is
blocked.
Pump, hose, or other
parts are frozen due to
outside temperatures.
Hose kinks.
The nozzle pattern does not
spray correctly.
Multi-spray nozzle is
blocked.
There is water remaining in
the lance and pump after
stopping.
Blockage in the soap bottle. Clean it with fresh water.
The battery pack is not
attached well.
Battery pack is empty.
Defective battery.
Additional air could be
sucked into the machine.
Battery pack is empty.
The multi-spray nozzle is
blocked. The current
protection is activated.
Take out the hose filter and rinse the parts
with clean water.
Check and reattach the garden hose
tightly.
Tighten the hose adapter securely with a
spanner.
Contact POWERSMART service to
get a filter screen.
Clean the filter screen regularly.
Wait for the pump, hose or other parts to
thaw.
Straighten out the hose.
Make sure the nozzle pattern symbol
aligns with the indicator mark on tool.
Replace with a new multi-spray nozzle.
Drain all the water completely before
storage.
Reinstall the battery pack.
Replace with a new battery pack or
recharge the battery pack.
Replace with a new battery pack.
Check connection between the hose
adapter and the draw hose.
Replace with a new battery pack or
recharge the battery pack.
Remove the multi-spray nozzle and
turn on the machine. If the machine
works normally, replace with a new
multi-spray nozzle.
13
Solution
