Installation; Removing The Packaging Reinforcements - essentiel b ELS106-1b Manual De Instrucciones

Table of wash cycles and functions
Table of consumption values
Deferred start
Selecting options
cleaning and maintenance
Cleaning the exterior of the appliance
Cleaning the detergent drawer
Cleaning the water supply hose filters
Draining remaining water and cleaning the drain pump filter
troubleshooting guide
46

Installation

68
69
• The client is responsible for preparing the location of the machine, the power supply,
70
water supply and drainage.
70
• Check that the water supply and drain hoses and the power cord are not kinked,
78
pinched or crushed when you push the product into its place, after the installation or
cleaning procedures.
78
• Ensure that the installation and electrical connections for the appliance are carried out
78
by an approved maintenance agent. The manufacturer shall not be liable for damage
78
resulting from work carried out by unauthorized personnel.
79
• Prior to installing, check whether the product has any defects. If you identify any, do
not install the appliance. Damaged products are a safety risk.
81
Removing the packaging reinforcements
Tilt the washing machine backwards to remove the packaging reinforcement. Remove
the packaging reinforcement by pulling on the security ribbon. Do not perform this
operation on your own.
47