Idiomas disponibles
Idiomas disponibles
EN
1. Basic characteristics
(1) The password can be set in two groups (1-8 digits).
(2) The normal working voltage is 3.6-6.8V.
(3) Factory password setting:
Customer password is "1234".
Manage password is "123456".
2. Open the door
(1) Enter the correct password and press the "#" or "*" key to confirm, the yellow light flashes
3 times at the same time buzzer hurried beeps 3 times, the electromagnet is closed for 7
seconds, and the green light is on for 7 seconds, please turn the key or handle inwards
within 7 seconds (if there is a handle, please turn the handle) and pull to open the box.
(2) The yellow light flashes and beeps when input in every time, which indicates
microprocessor confirmation.
3. Close the door
Close the door, turn the key or knob (if there is a handle, please turn the handle to a vertical
position).
4. Set and Change customer password
In the case of the door opened, press the button on the hinge side of the safe, the yellow light
is on, and the user code is entered within 15 seconds, then press the "#" or "*" key to confirm,
the buzzer beeps twice, the yellow light goes off, and the password is set successfully.
5. Set and Change manage password
In the case of the door opened, enter "00" and press the button on the inside of the door, the
yellow light is on, enter the manage password within 15 seconds and press "#" or "*" to
confirm, the buzzer beeps twice, the yellow light goes off. The password is set successfully.
6. Under voltage
When entering the password to open the door, if the battery voltage is 4.5V ± 0.2V, the
electromagnet is closed and the green light is on and red light will also light at same time, it's
a reminder that the battery needs to be replaced. When the voltage is less than 4V, the lock
can't work normally. At this time, you can connect to the external power supply to open the
door and change the battery, or open the door with emergency lock.
7. Lock function
Entering an incorrect password three times, the safe will be locked for one minute and will
work normally after one minute.
8. Installing the safe
2
