Tabla de contenido
EN
ADJUSTING THE BLADE TIGHTNESS
Disconnect the power supply between the scissors and the
battery before use.
REPLACEMENT OF BLADES
The scissors must be disconnected from the mains before buse.
2
1
1. Use a hexagonal spanner to loosen the screwsG).
1
2. Tighten the nuts with a socket wrench®,
2
Tighten the locking screwG) That's all.
4
5
3
23
1. Remove the nut.
2. Remove the screws.
3. Remove the screw.
4. Take out the pendulum.
5. You can change the blade.
ALTUNA ACB20
Tabla de contenido
