Idiomas disponibles
Idiomas disponibles
UMING
Personal Injury Hazard
Use care if vacuum cleaner is
placed on stairs. If it falls, personal
injury or property damage could
result.
Carpet edges
Guide either side or the front of the nozzle
along a baseboard.
The full length brushes
help remove trapped dirt at carpet edges
Stairs
Put handle in full upright position
Use the
crevice tool or dusting brush_ Set the On/Off
switch to ON
MOTOR PROTECTION
SYSTEM
Thermal Protector
This vacuum has a thermal protector which
automatically
trips to protect the vacuum
from overheating
If a clog prevents the
normal flow of air to the motor, the thermal
protector turns the motor off automatically
to
allow the motor to cool in order to prevent
possible damage to the vacuum.
During this
time the headlight
remains on,
To correct problem:
If this occurs, turn the
vacuum off and unplug the power cord from
the outlet to allow the vacuum to coot and
the thermal protector to reset
Check for
and remove clogs,
if necessary.
Also
check and clean/replace
any clogged
filters.
Wait approximately
thirty
(30)
minutes
and plug the vacuum
in and turn
back on to see if the motor protector
has
reset.The
motor
protector
will not reset if
the vacuum
is not turned
off even if the
vacuum
has cooled
down.
PERFORMANCE
INDICATOR
SOME
MODELS
When
the unit is running
with normal
air
flow, the light on the performance
indicator
is off_ The light comes
on whenever
the
airflow becomes
blocked.
If that occurs,
check the dust bin, clean/replace
clogged
filters, and check other possible
clog
locations
shown in CLOG REMOVAL
To correct
problem:
See the TROUBLE-
SHOOTING
chart
NOTE: The
light may
also come on
when using
attachments,
due to
reduced
airflow
through
the
attachmenL
Indicator
11
