Four Seasons Courtyard Breckenridge HYUTT10002-2 Manual Del Propietário página 9

MAINTENANCE
Envirostone Surface Care
®
Our Envirostone material has been sealed with a patented treatment to prevent staining and
®
moisture absorption, but it does require proper maintenance to ensure the integrity of the surface.
Please see below for recommendations on maintaining your Envirostone
pleasure:
• Clean any spills immediately to prevent permanent Envirostone
Blot any liquid spills with a clean, dry cloth to avoid spreading of the spill to the rest of the table.
Clean your Envirostone
water and mild dish soap to remove any surface dirt or mild spills. Rinse all soap solution off of the
tabletop and dry completely to avoid water spots. Regularly cleaning the Envirostone
aid in a longer lasting product.
• Do not use petroleum-based or abrasive cleaning products. Do not use any harsh brushes when
cleaning the Envirostone
• Do not slide products across the Envirostone
damage.
• Always use protective mats such as coasters or placemats when eating on an Envirostone
surface. These protective products will help absorb sweating on cool beverages and will block
out any heat rings from appearing beneath a warm mug or plate. When placing hot dishes on an
Envirostone surface, always use mats or hot pads.
®
• Envirostone surface must be covered at all times when not in use. Cover your product with an
®
outdoor furniture cover when not in use to protect it from the elements. Store your product indoors
during winter months. Avoiding extreme cold temperatures will prevent cracking of the tabletop.
TROUBLESHOOTING TROUBLESHOOTING
Problem
Burner won't light with
a match
Heating unit emits a lot of
black smoke
Flame blows out
easily
surface with a soft, clean cloth or sponge. Mix a solution of warm clean
®
surface.
®
Cause
No gas flow
Regulator isn't connected securely to the
tank
Spider webs or insect nest in the burner
and guard
Burner ports are clogged
Flame is obstructed at burner ports
High or gusting winds
No gas flow
surface staining or damage.
®
surface to avoid permanent scratching and
®
Solution
Check if gas cylinder is empty
Tighten regulator connection to the gas
tank
Check the burner and guard
Turn all gas flow connections off. Insert
an opened paperclip (or similar item) into
each of the burner ports to clear them
out.
Check that all burner ports are free of
any small lava rocks/pumice stones/
LavaGlass
Increase flame to 'high'
Check if gas cylinder is empty
surface for years of
®
surface will
®
®
pieces
®
1-866-771-2663 | Page 9