Sennheiser HD 410 SL Modo De Empleo página 3

DYNAMIC HEADPHONE HD 410 SL
Technische Daten HD 410 SL
Wandlerprinzip.dynamisch
Ubertragungsbereich. 20-18000 Hz
Nenmmpedanz. 600
Q
Kennschalldruckpegel pro System bd 1 kHz . . .. ca. 94 dB (- 1 Pa) bei 1 mW Letstung
Nennbelastbarkeit (max. Dauerbetastbarkeit).0.1 W (nach DIN 45500 und Pmtbedingungen
Klirrfaktor (nach DIN 45 500).< 1 %
Art der Ankopplung an das Ohr.ohraufliegend (supraaural)
Andruckkraft.ca. 2,5 N
Gewicht ohne Kabel.ca. 82 g
Lange des AnschluBkabeb.3 m
Stecker.Umversalstecker PX1 (Wurfel-5/6,3 mm 0
Stereokhnke)
Abweichungen flir HD 410 SL-2
Nennimpedanz.50
Q
Stecker.Umversalstecker PX 2 (3.5 mm 0/6,3 mm 0
Stereoklmke)
Abweichungen fOr HD 410 SL-13
Stecker.6.3 mm 0 Stereoklmke
Anderungen, vor allem zum techmschen Fortsctiritt. vorbetwlten
The HD 410 SI 6 a high quality dynamic HiFihead
phone built so as to be as 'open' as possible. It
excells not only by its balanced and natural sound
impression and the wide frequency response but
also by its attractive design. Besides its excellent
sound qualities the HD 410 SL offers a high weanng
comfort due to its light weight the soft ear cushions
and the adjustable transducer systems.
Models
HD 410 SL
(AitNo. 2372)
Stereo headphone with 3 m long connecting cable
and universal plug PX 1. Impedance: 600
Q.
HD 410 SL-2
(Art No. 2557)
Stereo headphone with 3 m long connecting cable
and universal plug PX 2. Impedance: 50
Q
HD 410 SL-13
(Art Nr 2385)
Stereo headphone wrth 3 m long connecting cable
and 6.3 mm 0 stereo jack plug. Impedance: 6001
i
Use
See illustrations:
0
Weanng the headphone
<2>
Connectors
3 Adjusting the headphone systems
« Changing the connecting cable
® Removing the ear pads
Hints for use
- Before putting on the headphone switch on your
HFiequipment This prevents your ears from get¬
ting too high sound pressure levels, if the volume
control is set to highest volume.
- Please take into consideration, that too loud hear¬
ing over a considerably long period of time may
lead to hearing damages.
Spare parts
Ear cushions (one pair)
Part No. 28 711
Headphone capsule 600
Q
PartNo. 19116
Headphone capsule 32
Q
Part-No. 19117
Cable with PX 1
Part-No. 29571
Cable with PX 2
Part No. 29547
Cable with 6.3 mm 0 plug
Part-No. 12836
Your dealer will have these and spare parts tor all
other Sennheiser headphones at your disposal. If
not, please contact your next Sennheiser distribu¬
tor.
Spare parts are available up lo five years alter the
production has ceased.
Hints for cleaning
• Ear pads
1. Remove tl>e ear pads from the headphone.
2. Wash with a soft detergent at+30°C max. Rinse
well! Squeeze out the water and press the pads
with a dry cloth.
3. Hang them up and then re fit to the headphone.
• Headphones
For cleaning Ihe hard plastic parts use a cloth
slightly dampened with water and a mild house
hold detergent.
Accessories
HZR 26-33
(ArtNo. 1783)
Stereo control with 6 m cable and 6.3 mm 0 jack.
HZR 26-1 PX
(ArtNo. 2133)
Stereo control with 3 m cable and universal plug
PX L
HZR 26 PX (Art.-No. 2073)
Stereo control with 6 m cable and universal plug
PX 1.
4
5