Idiomas disponibles
Idiomas disponibles
CLEANING & MAINTENANCE
Any other servicing should be performed by an authorized service representative.
Cleaning the Roller Brush
Always turn off the unit, remove the battery, and detach the floor head before
attempting to clean the roller brush.
1.
Move the release button of the roller brush with your finger along the direction
of the arrow, and take out the cover plate on one side of the roller brush. Take
out one end of the rolling brush in the direction shown in the picture, and
remove the rolling brush from the notch.
2.
Use the Short Cleaning Brush with Cutter (#15) to cut out any hair that may be
entangled in the roller.
3.
Gently wipe clean the roller with a dry cloth. If you use a damp cloth
(not recommended) please ensure it is fully dry before re-installing.
4.
Insert one end of the roller brush as shown in the picture and realign the other
end. Re-attach the cover plate.
Tangle-Resistant Motorized Soft Roller with LED (#3)
release
button
Tangle-Resistant Motorized Carpet Roller (#4)
release
button
1
1
2
2
EN | 16
3
1
click
sound
2
3
1
click
sound
2
4
4
