Idiomas disponibles
Idiomas disponibles
RACK DRY
Installing
the drying rack
1. Open the Dryer door.
2. Position drying rack in tumbler, placing the front lip of the drying rack on the top of the lint
filter.
3. Place the rear legs in the two recessed areas of the dryer's back wall then push down the
middle of the drying rack to fix.
4. Place the items to be dried on the rack, leaving space between them so air can circulate.
5. Close the Dryer door.
6. Use the Time Dry cycle. Select the time according to the moisture and weight of the items.
Start the Dryer. It may be necessary to reset the timer if a longer drying time is needed.
Washable sweaters
Low or Extra Low
(block to shape and lay flat on rack)
Stuffed toys
Low or Extra Low
(cotton or polyester fiberfilled)
Stuffed toys
Air Fluff
(foam or rubber-filled)
Foam rubber pillows
Air Fluff
Sneakers
Air Fluff or Heat (Extra Low)
Z4_ Drying foam rubber, plastic, or rubber on a heat setting may cause damage to the item and
....... lead to a fire hazard.
operatng
hstructons,
tips 23
DV219AGW-02691A
EN.indd
23
2009-01-30
_;.&t_._6:19:30
