Kenmore 69612 Guia Del Usuario página 42

Idiomas disponibles

Idiomas disponibles

Turntable
PROBLEM
The turntable will
not turn.
CAUSE
• You have turned off the turntable.
(See the "Heating more than one plate of
food" section on Page 14.)
• The turntable is not correctly in place. It should be correct-side
up and
sitting firmly on the center shaft.
• The support is not operating correctly. Remove the turntable and restart the
oven. If the support still does not move, call an authorized service technician
for repair. Cooking without the turntable can give you poor results.
Tones
PROBLEM
You do not hear the
programming
or
end-of-cycle
tone.
CAUSE
• You have not entered the correct command.
• You have turned off the tone. See the "Audible signals" section on Page 13.
Display
messages
I
PROBLEM
The display is flashing ":".
CAUSE
• There has been a power interruption.
Reset the clock. (See the "Setting the
clock" section on Page 16.)
If none of these items are causing your problem, see the "Sears Toll-Free Numbers" section on Back Cover.
Please record your
model's information.
Whenever you call to request service for your appliance,
you need to know your complete model number and
serial number. You can find this information on the
model and serial number labeVplate (see "Microwave
oven features" in the "Getting to Know" section). Also,
record the other information shown in the next column.
Model Number
Serial Number
Purchase Date
Dealer Name
Dealer Address
Dealer Phone
42
loading

Este manual también es adecuado para:

6961769619