Idiomas disponibles
Idiomas disponibles
CAUTION:
Turn the power off before replacing ink roller.
DISPLAY SYMBOL
M
: A number has been stored in Memory
E
: Error or overflow of capacity
: The display value is negative
DATE AND TIME FUNCTION
TIME
12/24
AM/PM
X
The TIME key is used to display the Time or Date. Depressing the
TIME key once displays the date MM-DD-YYYY. Depressing the
DATE key a second time displays the time, HH-MM-SS.
When displaying the Date or Time the = key becomes a key to
enter or exit the date or time set mode.
When displaying the Time the -e- key becomes a key to toggle be¬
tween the 12 (AM/PM) or 24 hour clock mode.
When displaying the Time in the set mode the x key becomes a key
to toggle between AM and PM when in the 12 hour time mode.
Set Date and Time
1) Press TIME and then SET (The first digit of the month will flash)
2) Enter the month MM using the number keys. (The first digit of the date will flash)
3) Enter the date DD using the number keys. (The first digit of the year will flash)
4) Enter the year YYYY using the number keys. (The first digit of the month will flash)
5) Press SET to confirm the date.
6) Press TIME and then SET. Enter the time using the number keys and press
12/24
to switch between 12-hour or 24-hour clock.
7) Press AM/PM to toggle morning or afternoon and press SET to confirm the
time.
Problem
Operation
Read-out
Printing-Out
How to set date:
time|
MM-DD-YYYY
Oct. 29, 2001
=
(Hold 3 seconds)
"M"M-DD-YYYY
10
10-"D"D-YYYY
29
10-29-"2"YYY
2001
"1 "0-29-2001
SET
10-29-2001
How to set time:
c/ce| |time| |time|
HH-MM-SS
a)
3:45AM
SET |
(Hold 3 seconds)
"H"H-MM A
33 45
"0"3-45 A
SET
03-45-00 A
b)
3:45PM
SET
(Hold 3 seconds)
"0"3-45 A
AM/Pfc
x
SET
03-45-00 P
c)
15:45
w
15-45-00
DATE FORMAT:
While displaying the date, depressing the FORMAT key al¬
lows changing the date format mode from MM-DD-YYYY to
DD-MM-YYYY or YYYY-MM-DD. The default date format is
MM-DD-YYYY
NOTE:
If the power cord is disconnected from the AC power source
for more than 1 hour the date/time memory will be lost and
need re-set.
RESET:
Electromgnetic interference or electromgnetic discharge may
cause the display to malfunction or the contents of the memory
to be lost or altered. Should this occur, use the tip of a ball
point pen (or similar sharp object) to press the [RESET] but¬
ton on the back of the calculator. After resetting, be sure to
set the tax rate , time and date again.
E4
E5
