Columbus X500S Manual De Instrucciones página 11

Máquinas excéntricas
Idiomas disponibles
  • ES

Idiomas disponibles

1.9 Operating personnel
The appliance may only be operated and maintained by approved, properly trained and instructed personnel. The personnel must
have been especially instructed about the dangers which can arise.
"Instructed persons" are those who have been informed about the tasks they have to perform and about possible hazards if the
equipment is used incorrectly; where necessary, they have been taught about the appropriate protection measures and the
precautions to be taken.
"Qualified persons" are those who, through their training, knowledge and experience as well as their knowledge of the relevant
regulations, are able to do the tasks conferred on them and to recognize the potential dangers.
If the persons concerned do not have the necessary knowledge, then training is required accordingly.
The responsibilities for operating and servicing the equipment must be clearly defined and adhered to, so that misunderstandings
which could affect safety are avoided.
The appliance may only be operated and maintained by people who can be expected to perform their work reliably.
Their approach to work must in no way endanger people, the environment or the equipment.
People under the influence of drugs, alcohol or medication which affects their reactions, are not allowed to work on or with the
appliance in any way.
When choosing personnel, the youth employment laws of the country concerned must be taken into account with regard to
minimum age requirements and any occupation-specific rules relating to this.
It is the responsibility of the operator to ensure that no unauthorized person works on or with the appliance.
Unauthorized persons, such as visitors, etc, may not handle the appliance. For security reasons they must be kept at an
appropriate distance.
It is the duty of the operator to report any changes in the way the appliance works, which could affect safety, immediately to the
person responsible.
Switch off the machine during cleaning and maintenance work. Activate the parking brake and remove the switching key.
1.10 Operating position
During floor cleaning, the operator's workplace is located at the guide handle behind the device.. Only one person may work on the
device at any one time.
1.11 Conduct in the case of danger or accidents
Where there is danger or if an accident occurs, immediately stop the appliance by switching it off and pulling of the mains plug.
Ensure that First-Aid equipment (first-aid box, eye lotion, etc.) and a fire extinguisher are available nearby.
Staff must be made aware of the procedures to be followed and location of safety equipment, alarm buttons, First-Aid boxes and
rescue equipment. This will ensure prompt action in the case of accidents or if dangers occur.
1.12 Maintenance
WARNING!
Pull out the mains plug before cleaning and servicing the machine.
The maintenance intervals (according to the Maintenance Instructions) must be complied with.
1.13 Accessories and spare parts
Only accessories and spare parts approved by the manufacturer may be used. By using original accessories and original spare
parts, it is ensured that the device can be operated in a safe, reliable and failure-free manner.
ATTENTION!
Incorrect or defective spare parts of third-party manufacturers might damage the device. If, however, other spare parts
than original spare parts of the manufacturer or spare parts which were not purchased from the manufacturer are
used, all obligations entered into by the manufacturer or their dealers, such as guarantee commitments, service
contracts etc., will expire without notice.
11
loading

Productos relacionados para Columbus X500S