Idiomas disponibles
Idiomas disponibles
Step 3 Powering on the Machine
1
Connect the power cord to the rear of
the machine and the other end to the
power outlet.
2
Connect network cables as needed.
Step 4 Default Settings of the Machine
1
Select default language > [Next >].
Language
The setup screen appears.
2
The settings can be configured in a
wizard-style screen.
Machine setup
End
Welcome!
Date/Time
Set time zone, date, and time.
Network
If you want to set them later,
Email
press [Skip >>].
Home Screen Setup
Others
Follow the instructions on the screen.
NOTE
To set the current item, select [Go to Settings >].
To advances to the next item without setting
the current item, select [Skip >>].
2
1
Next >
Go to Settings >
<< Previous
Skip >>
3
Turn the power switch ON at the front
of the machine.
3
When the following screen appears,
select [Finish] > [Yes].
Date/Time
Network
Email
Home Screen Setup
Others
+ It takes about 6 minutes from the time
the power is turned on until the unit is
ready for use.
3
Machine setup
To complete the setup, press [Finish].
Quick Setup Wizard in the System Menu
lets you easily configure basic settings.
Use this menu first. And use the de-
vice's web COMMAND CENTER RX to
easily configure advanced settings such
as email and network.
See the operation guide for details.
Finish
<< Previous
EN
