Zafferano push-up LD1050B3 Instrucciones De Uso página 3

Lámpara de mesa recargable
Idiomas disponibles
  • ES

Idiomas disponibles

push-up
Rechargeable table lamp
LD1050B3 white
4.7"
LD1050N3 dark grey
12cm
LD1050R3 rust
LD1050S3 sand
3.1 - 3.9"
8 - 10cm
INCLUDED
This product contains a class F light source
1. Tips for use:
This product is exclusively for lighting purposes and:
A) It must not be exposed to heavy mechanical loads or contamination; B) It can be installed and used only after checking the state of the pro-
duct; check that is not dirty and has not been damaged during storage; C) Installation and maintenance must be carried out when the appliance
is switched off; D) Any alterations to the product, any tampering and any failure to comply with the instructions provided may make the appliance
hazardous; E) When fully assembled, the lamp (without the recharging base), reaches an IP54 rating, making it ideal for outdoor use. The assembled
lamp placed on the recharging base has an IP20 rating, making it unsuitable for outdoor use;F) All metal and plastic surfaces should be cleaned with
a soft dry cloth; G) The company Zafferano shall not be held liable for any damage caused due to its products being assembled in any manner that
does not comply with the instructions provided.
2. Technical data of the lamp:
- Power: 2.2 W
- Volt: DC 5 V
- Color temperature: 2200-2700-3000 K
- Lumen-LED: 207-235-248 lm
- Lithium battery pack included (see section accessories included); for instructions about how to replace the battery pack, please consult the
website: ZafferanoAmerica.com Use only original batteries for replacement.
- Charge: 5/6 h
- Battery life: 11-12 h - 100%
- Class: III
- Protection rating: IP54
- CRI>80
3. Battery charger technical data:
- Contact charging base: INPUT/OUTPUT 5Vdc - 1A; cavo USB 1.2 Mt.
- Charger: INPUT AC100-240V 50/60Hz; OUTPUT 5Vdc- 1A.
- The lamp works correctly even when connected to the charging base.
- It is advisable to use the original charger and charging base. Alternatively, you can use a certified 1A max. charger.
4. Important:
- We recommend cleaning using only a soft, dry cloth. The use of aggressive cleaning agents or abrasive cloths, and any accidental knocks, may
damage the delicate leaf finish.
- The support surface for the lamp must not exceed a 15° tilt or it will fall.
- The battery has an overload protection function.
- To preserve the integrity of the battery, we recommend keeping the charge between minimum 20% and maximum 80%; if the lamp is not used for
long periods, it is advisable to regularly charge/discharge the product.
- Please refer to local laws for the proper disposal and recycling of the battery.
DESIGNED BY ZAFFERANO SRL IN ITALY, MADE IN PRC • Imported by Zafferano America LLC, 301 Penhorn Avenue Suite 5 Secaucus, NJ 07094, USA
For more information and updates visit our website • ZafferanoAmerica.com
3
LED DIMMER
2.2W LED • 207-235-248lm
2200-2700-3000K •
IP54
• CRI>80
5Vdc max 1A
D 4.7" x H 3.1 - 3.9" / D 12cm x H 8-10cm
NOT INCLUDED
LD0USAPLUG-WHITE
Single-contact
USB port power charger
charging station
LD0350RP
Multi-contact
charging base (max. 6 pc)
LD0340RA
Multi-socket USB
charger (8xUSB)
BAT04701906701900
Replacement battery pack
x 2 pz
INSTRUCTIONS FOR USE
SWITCHING ON / SWITCHING OFF / DIMMING
Press down and release the top of the lamp when you
hear a click. The lamp will open and turn on. To turn
the lamp off, press down until the lamp clicks shut.
CLICK
CLICK
COLOR TEMPERATURE CONFIGURATION
4 sec
<1 sec
2200K
When the lamp is switched off, press
Quick tap on the touch sensor
lightly for 4 seconds until a steady blue
to change the color temperature
LED lights up
of the lamp
INDICATOR LEDS
FLASHING RED LED
the battery charge is lower than 20%,
charging is recommended.
When the charge is depleted (1%), the lamp
does not switch on but emits three white flashes
as an alert to charge
Charge the battery before initial use.
To correctly charge the lamp, we recommend that you:
1) Connect the USB cable to the adaptor;
2) Put the plug into the electrical socket
3) Place the lamp on the charging base;
4) When fully charged, disconnect the plug from the electrical socket
DESIGNED BY ZAFFERANO SRL IN ITALY, MADE IN PRC • Imported by Zafferano America LLC, 301 Penhorn Avenue Suite 5 Secaucus, NJ 07094, USA
For more information and updates visit our website • ZafferanoAmerica.com
When the lamp is switched on, lightly press the touch sensor to
obtain the desired brightness. Every time you turn it on, the light
intensity returns to 100%.
<1 sec
<1 sec
4 sec
2700K
3000K
Light pressure for 4 seconds to set
the new color temperature and switch off
the lamp
PERMANENT RED LED
PERMANENT GREEN LED
charging in progress
the battery is 100% charged,
disconnection from the power charger
is recommended
4
loading

Este manual también es adecuado para:

Push-up ld1050n3Push-up ld1050r3Push-up ld1050s3