Tabla de contenido
Idiomas disponibles
Idiomas disponibles
5.7.Press
▲
searching from channel 0 in turns of V-L , V-H and UHF. Station of
sufficient strength will be memorized and searching stops.
6. PRESET (When TV function moves to fixed channel search,
operate as the below instruction.)
POSITION, REMEMBER, ANTENNA and AUTO-SEARCH will display
on the screen as below description:
6.1.Press
▲
6.2.Press
▲
ON, this channel will be displayed when selected. When
REMEMBER is OFF, this channel will not be displayed.
6.3.Press
▲
AIR, CATV-STD, CATV-HRC, CATV-IRC.
6.4.Press
▲
search.
In order to watch TV properly
1. Set the desired OSD language by pressing LANG.
2. Ensure the COLOR-SYS, SOUND-SYS is correct by checking from
SYSTEM menu.
3. Select AUTO-SEARCH in PRESET menu, and start auto search TV
signal.
4. Adjust the length, angle and direction of the telescopic antenna to
obtain optimum image.
Notice:
In case the signal intensity is too weak, the image will remain inferior
whatever you adjust the antenna, and cause loud noise wave,
shaking image and inferior sound, etc., which is not TV fault. If the
image remains inferior when using telescopic antenna, please try
to use the external antenna or CATV.
or
▲
to select AUTO-SEARCH. Press
or
to select POSITION, and press
▲
or
to select REMEMBER, and press
▲
or
▲
to select "ANTENNA" item, Press
or
▲
to select "AUTO-SEARCH" item: press
or
to start auto
or
to set.
or
to select
or
to select
or
to auto
Tabla de contenido
