Idiomas disponibles
Idiomas disponibles
b. Unplug charger before plugging or unplugging
appliance.
15. Use only with Model No. PYS-050H200U001 supply unit
provided with the product.
16. Do not lay metal objects across positive (+) and negative
(-) battery terminals, charger terminals or trimmer
terminals.
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE AND COMMERCIAL
USE
For animal trimmers only:
The appliance is for trimming purposes only.
Animal shearers can only be use by trained personnel.
076059-810_076059-910_078059-210_76059CL_78059CL_21ESFM5.indd 4-5
076059-810_076059-910_078059-210_76059CL_78059CL_21ESFM5.indd 4-5
English
4
ABOUT THE TRIMMER
DO NOT USE THIS APPLIANCE UNTIL YOU HAVE READ THESE OPERATING INSTRUCTIONS
OPERATE ON VOLTAGE SPECIFIED ON APPLIANCE
HOW TO CHARGE THE UNIT
Place trimmer on charging stand or connect directly to the power supply cord. This trimmer has one control LED
INDICATOR.
Trimmer Off Charger
Battery Level <20%
Solid Red
Battery Level <10%
Pulsing Red
Faulty Battery
Quick Pulsing Red
Trimmer In Charger
Charging
Pulsing Green
Fully Charged
Solid Green
CHARGING WITH THE CHARGING STAND
1. Plug the power cord of the charging stand into an outlet with the rate voltage for your unit.
2. Plug the other end into the charging stand. Note that the cord will only fit into the charging
stand with the proper orientation.
3. Ensure that the switch on the unit is in the «OFF» (O) position.
4. Check the contacts of the trimmer and the battery for foreign particles and contamination.
5. Insert the trimmer into the charging stand so that the top of unit is facing you and the contacts
on the trimmer are aligned with the contacts on the charging stand. The top of the unit is the
side with the switch (Figure 1).
6. While the unit is being charged, the LED will pulse green until fully charged. Once the battery is
fully charged, the LED will display a continuous green light and is ready for use.
7. If the LED light will not turn on, then re-insert the trimmer into the charging stand and push
down gently on the trimmer to engage the contacts. Note: If the LED does not turn on then there
may be dirt or grease on the contacts of the charging stand or trimmer. Clean the contacts with an approved
cleaning solution and re-insert the trimmer into the charging stand. If the LED still fails to turn on then follow
the return procedure under the warranty and service section.
8. The LEDs will stay on as long as the unit is in the charging stand.
English
Figure 1
5
2021/9/27 上午10:24
2021/9/27 上午10:24
