NORAUTO NO0854 Manual De Usuario página 36

Problem
EN
There is water inside.
There is ice formation near
the inner ventilation slots
TECHNICAL DATA
Connection voltage
Power consumption
Length
Insulation
Materials
Weight
GENERAL PRODUCT PARAMETERS
Parameter
Overall
dimensions
(millimetre)
EEI (%)
Airborne acoustical noise
emissions (dB(A) re 1 pW)
Annual energy consumption
(kWh/a)
Minimum ambient
temperature (°C), for which
the refrigerating appliance
is suitable
Winter setting
36
Possible cause
The moisture in the air, trapped
inside the cooler, condenses to
water when the temperature
inside the cooler falls.
The moisture in the air, trapped
inside the cooler, condenses
to water and freezes in
contact with the cooling plate.
Ice formation can block the
ventilator and damage the unit.
DC connection cable
AC power cord
C5H10
Polypropylene (case), high quality of polyurethane full foam,
CFC-free (insulation)
5 kg
Value
Height 467
Width 403
Depth 307
86
38
65
16
 yes  no
The cooler is not defective.
Wipe it out with a dry cloth if
necessary.
The cooler is not defective.
Switch the unit off and let
the ice melt. Wipe it out
with a dry cloth if necessary.
Check the unit periodically
for ice formation.
DC 12 V
AC 230 V~, 50 Hz
DC 42 W
AC 55 W
(approx.) 2.5 meters
(approx.) 1.5 meters
Parameter
3
Total volume (dm or l)
Energy efficiency class
Airborne acoustical noise
emission class
Climate class
Maximum ambient
temperature (°C), for which
the refrigerating appliance is
suitable
Suggested remedy
(negative earth)
Value
25
E
C
N
32