Idiomas disponibles
Idiomas disponibles
Step 1: Remove the Existing Floodlight
1.
Turn off the power at circuit breaker or fuse box.
Check with an electric tester to make sure that the power is switched off
2.
before the installation.
3.
Remove the existing floodlight and pull it out from the wall to reveal the wires.
Step 2: Install the Mounting Plate
1.
Attach the mounting plate to the existing junction box.
2.
To fix it, use the appropriate plate and screws that are given.
Note: The mounting plate concave side must be facing outward.
6
