Idiomas disponibles
Idiomas disponibles
Wiring Instructions:
IN-LINE FUSE
IN-LINE FUSE
(USER SUPPLIED)
(USER SUPPLIED)
+
-
CD5031XX:
Red Wire
Positive, Colors 1 & 3
White Wire
Positive, Colors 2 & 4
Red/White Wire Positive, Colors (1 & 3) and (2 & 4)
Black Wire
Negative
Blue Wire
Pattern Select to Negative
Yellow Wire
Synchronized Function
Apply Blue to Black wire:
0-1 seconds
Next Pattern
1-3 seconds
Previous Pattern
3-5 seconds
Factory Default Pattern
5+ seconds
Last Pattern
Apply Blue to Red (Positive) wire: DIM (FUTURE)
Synchronization:
The directional is capable of syncing with other compatible CODE 3 products by following the steps below:
Step 1. Set the desired flash pattern on each unit individually. It is also strongly recommended that the same rate and style of flash
pattern be used on all synced units to produce the most effective warning pattern. Note: To operate simultaneously, each unit must
be set to the same phase (A + A or B + B); to operate alternately, units must be set to have the opposite phase (A + B or B + A).
Step 2. Connect the yellow sync wires together and check that the units are flashing in a synchronized manner as expected. If a
pattern on one unit appears incorrect, the blue pattern select wire can be used to cycle forward or backward on that individual unit until
the correct pattern is selected. Note: This will on change the pattern in the one unit and will not affect the other units connected
to the yellow sync wire.
WHITE - SEE TABLE BELOW
WHITE - GROUP 2
TO POSITIVE
SWITCH
SWITCH
(USER SUPPLIED)
(USER SUPPLIED)
RED - GROUP 1 TO
POSITIVE
RED - SEE TABLE BELOW
SWITCH
SWITCH
(USER SUPPLIED)
(USER SUPPLIED)
BLACK - GROUND
BLACK - SEE TABLE BELOW
Figure 7
CD5031XXX:
Red Wire
White Wire
Red/White Wire Group 3 to Positive
Black Wire
Blue Wire
Yellow Wire
Green Wire
Apply Green to Black wire:
MODE 1
MODE 2
MODE 3
MODE 4
MODE 5
MODE 6
MODE 7
(CD5031XXX ONLY)
GREEN - MODE
GREEN - SEE TABLE BELOW
SELECT TO GROUND
RED/WHITE - SEE TABLE BELOW
RED/WHITE - GROUP 3
TO POSITIVE
YELLOW -
YELLOW - SEE TABLE BELOW
SYNCHRONIZE
BLUE - PATTERN
BLUE - SEE TABLE BELOW
SELECT TO GROUND
Group 1 to Positive
Group 2 to Positive
Negative
Pattern Select to Negative
Synchronized Function
Mode Select to Negative
Color 1
Color 2
Color 3
Color 1 & 2
Color 1 & 3
Color 2 & 3
Color 1 & 2 & 3
Page 4 of 7
