Oehlbach BTR 4.2 Manual Del Usuario página 14

4. The BTR 4.2 can then be found by other Bluetooth-capable
devices and pairing is possible.
5. Once pairing has been completed, the red LED flashes twice
for one second and audio signals can be transmitted.
6. To switch off the BTR 4.2, press and hold the function button
for 3 seconds.
BTR 4.2 as a Bluetooth transmitter
In receiver mode, the BTR 4.2 can be connected to other
Bluetooth-capable devices that use a Bluetooth transmitter to
transmit audio signals wirelessly. In this case, the BTR 4.2 acts
as a Bluetooth receiver: To use the BTR 4.2 in receiver mode,
set the selector switch to „RX" and follow the above-mentioned
instructions from point three.
TROUBLESHOOTING
The BTR 4.2 will not switch on
Please make sure that the BTR 4.2 is connected via the USB
cable to a power supply of at least 500mA.
The BTR 4.2 cannot be paired with another device
a) Make sure that the Bluetooth device is no further than 1m
away during the pairing process.
b) Make sure that the Bluetooth function is enabled on the
device being connected and that its search/pairing mode is
active.
c) Check whether you have selected the right Bluetooth mode
(Receiver/Transmitter).
14