Aiyaplay 370-258V00 Manual Del Usuario página 4

Installation
Figure 1
Handle
connection
Folding button
of the handle
Handle base
1.Installation of front wheel and handle:
Insert the front wheel into the body as shown in Figure 1.Note that a slight force is required to make
sure the connection is well finished. It is seamless after connection. After that, press and hold the
folding buttons of the handle on both sides, turn the handle base to the position as shown in figure 1,
and fix the handle on the handle base. Note that the snap buckle pop out of the hole.
2.Rear wheels support unfolding. press and hold the button under frame, turn the rear wheel support
until it is completely unfolded and locked.
3.Rear wheel turn around: press and hold the rear wheel folding button to turn the rear wheel to the
position shown in figure 3. Insert the steel brace into the hole to stabilize the rear wheel support.
Figure 4
Little seat cover
Button to open the little seat cover
4.Take out the little seat cover: press the button at the bottom of the seat to open the seat cover, then
remove it.
5.Seat and canopy installation:
a: press and hold the backrest adjustment button on both sides of the seat to unfold the backrest.
b: Fix the seat on the seat base until heard "click" sound to make sure the seat is well fixed. Put the
little seat cover inside the seat, then buckle the big seat cover. Press and hold the button at the
bottom to unbuckle the big seat cover.
c:Turn and unfold the canopy to the proper position.
Figure 6 Figure 7
Headrest
Pedal
Wrong
Correct
connection
Figure 5
Big seat cover
Little seat cover
Figure 2
The button
under frame
Rear wheel fold button
Rear wheels support unfolding
Button to open the
big seat cover
6. Installation of headrest and pedal:
Insert the headrest into the hole on the backrest like
figure 6 shown. Fix the pedal on the front wheel, the
connection is finished when you hear the sound
"click".Note that there are two joints of the pedal--
outside joint and inside joint. outside joint for child's
feet rest on them without rotating with the wheels
inside joint for child drive self.
7.Unfold the footrest like the figure 7 shown.
4
Figure 3
Steel brace
Backrest adjustment button
Сanopy