PROBLEM
The Portable Power won't
power my 12V device.
The battery in the Portable
Power won't hold a charge.
The compressor shuts off
before reaching the set
pressure.
8. BEFORE RETURNING FOR REPAIRS
9. REPLACEMENT PARTS/ACCESSORIES
Male-to-male accessory cable ............................................................................ 94500109
Air compressor accessory kit (3 hose adapters with bag) ............................ 2299001425Z
POSSIBLE CAUSE
The 12V device is not
turned on.
The Portable Power's battery
is not charged.
The 12V device draws more
than 15A or has a blown fuse.
The battery is bad (will not
accept a charge).
The compressor has a
thermal cutoff, to protect it
from overheating.
If the above solutions do not eliminate the problem,
or for information about troubleshooting
or replacement parts,
call toll-free from anywhere in the U.S.A.
1-800-732-7764
7
•
•
REASON/SOLUTION
Turn on the 12V device.
Check the battery charge
status by pressing the Battery
Status button.
Contact a qualified service
technician, to replace the fuse.
Replace the battery.
Wait a few minutes. The
compressor will start up again
and finish the process.