Idiomas disponibles
Idiomas disponibles
Problem
Not working
Low suction power
Strange sound from motor
No water coming out
Water leakage
Can not charge
Dirty water tank full
indicator flashing
Clean water tank shortage
indicator flashing
Roller error indicator
flashing
Motor malfunction
Foam overflowing
TROUBLESHOOTING
Possible Cause
Low battery
Dirty water tank is full
Debris blocking at the intake
Filter is dirty
Debris or tangled hair
Hair or debris tangled
on the roller
Dirty water tank is full
Clean water tank is empty
The clean water tank is not
installed in place
Filter not installed
Filter not dried completely
Adapter is not plugged in well
Charging base not connected
with adapter well
The dirty water in tank has
reached the MAX line
Clean water tank is empty
The roller is tangled or not
installed in place
Too much cleaning solution.
Absorbed foamy material
Solution
Charging before use
(100% battery is recommend)
Take out the dirty water tank and
pour out the water
Clean the roller
Clean the filter
Clean the debris by the tube
or intake up
Clean the roller
Take out the dirty water tank and
pour out the water
Add water into clean water tank
Reinstall the clean water tank
Install filter
Clean it up and dry it completely
Check and plug the adapter into
a suitable wall outlet
Check and reconnect
Empty the dirty water and then
reinstall the tank
Refill the clean water tank
Clean the roller or reinstall
the roller
Contact the after-sales service
We recommend using our
recommended cleaning solutions.
Do not absorb foamy material.
EN
15
