Bedfont FeNObreath Guia De Inicio Rapido página 3

Ocultar thumbs Ver también para FeNObreath:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 6
EN
FeNO testing without limits
Features
FeNO testing
without limits*
Portable
PC Software
Low
maintenance
* Subject to correct use, maintenance and service. Tested up to 29,000 tests.
PLEASE CHARGE THE DEVICE IMMEDIATELY!
The FeNObreath® should be charged for a minimum of 24 hours before first use.
Easy to use
Adult and child
FeNO testing
Low-cost
Bluetooth
Technology
PAGE 4
®
1. Press and hold the on/off button once to switch the monitor on and wait up to 60 seconds
for the monitor to stabilize.
2. Attach a new mouthpiece to the unit and select either the adult
NOTE: To cancel the breath test, press the
3. As prompted onscreen by
to exhale.
NOTE: Ensure the patient inhales through the mouth before exhaling through the
mouthpiece.
4. When the exhale icons appear,
the mouthpiece. Make sure you are not covering the vent holes on the back of the device.
NOTE: The exhalation time is approximately 12 seconds for an adult and 10 for a child.
5. The onscreen flow meter will guide you on the exhalation rate: continue blowing until the
green check mark
NOTE: If you blow outside of the exhalation guidelines, the test will beep, before signifying
a fail, and a red cross
6. Following the green check mark, a result will appear on the screen, in ppb.
7. You may save this result by pressing
by pressing
8. If you choose to save your results you will be shown a list of patient profiles. Select a
previously set profile to add your result to, or select an empty profile to set a new one. Set
the profile by typing in a name or reference, and press
9. Remove and dispose of the mouthpiece in accordance with local waste and disposal
guidance.
10. If no further tests are required, press and hold the on/off button once to turn the
FeNObreath
NOTE: A PIN is required to save the reading to a patient profile, the default pin is 0000. It is
highly recommended that you change the PIN to a 4 digit number that you will remember. If
you have not entered your PIN in the last 30 minutes, you will be asked to enter it before you
can access the patient profiles. If your PIN is entered incorrectly, you will be notified and the
screen will refresh for you to re-enter your PIN. If you have forgotten your PIN, please contact
For a full copy of the manual please contact your local distributor
Taking a Breath Test
icon.
or
, inhale until your lungs are full and you are prompted
or
, keep the monitor upright and blow gently into
appears onscreen to signify a successful test.
will appear. Touch
to retry the test or
. Alternatively, you can return to the home screen
.
off and store on FeNObreath
Dock to charge unit.
®
®
Bedfont® Scientific Ltd. or your local distributor to reset it.
PAGE 5
EN
or child
breath test.
to view the result.
.
loading