Idiomas disponibles
Idiomas disponibles
The recommended ambient temperature range:
Item
Appliance storage temper-
ature range
Appliance operation tem-
perature range
Battery charging tempera-
ture range
Charger operation temper-
ature range
Battery storage tempera-
ture range
Battery discharging tem-
perature range
7
TROUBLESHOOTING
NOTE
Due to the high-power output of this tool, it is
recommended to use Powerworks 24V battery with
minimum 4Ah capacity or greater (e.g. G24B4). Use of
a smaller capcacity battery (e.g. G24B2) may activate
current protection and cause tool damage.
The LED light illuminates when the trigger is depressed.
LED light functions
Machine status
LED light sce-
nario
Normal
Solid light (no
flashes)
Low battery
3 flashes
Excessive force
6 flashes
Over tempera-
9 flashes
ture
8
WARRANTY
(The full warranty terms and conditions can be found on
Powerworks webpage)
The Powerworks warranty is 3 years on the product,
and 2 years on batteries (consumer/private usage)
from the date of purchase. This warranty covers
manufacturing faults. A faulty product under warranty
might be either repaired or replaced. A unit that has
been misused or used in other ways then described
in the owner's manual might be rejected for warranty.
Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not
affected by any additional warranty offered by a dealer
or retailer.
English (Original Instructions)
Temperature
32°F (0°C) - 113°F (45°C)
32°F (0°C) - 113°F (45°C)
39°F (4°C) - 104°F (40°C)
39°F (4°C) - 104°F (40°C)
32°F (0°C) - 113°F (45°C)
32°F (0°C) - 113°F (45°C)
Solution
No action nee-
ded
Replace or
charge battery
Restart machine
Let machine cool
off
A faulty product must be returned to the point of
purchase in order to claim for warranty, together with
the proof of purchase (receipt).
9
EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name:
Globe Technologies Europe GmbH
Address:
Brunnenweg 17, 64331 Weiterstadt,
Germany
Name and address of the person authorised to compile
the technical file:
Name:
Ralf Pankalla
Address:
Brunnenweg 17, 64331 Weiterstadt,
Germany
Herewith we declare that the product
Category:
Model:
Serial number:
Year of Construc-
tion:
•
is in conformity with the relevant provisions of the
Machinery Directive 2006/42/EC.
•
is in conformity with the provisions of the following
other EC-Directives:
•
2011/65/EU & (EU)2015/863
•
2014/30/EU
Furthermore, we declare that the following parts,
clauses of European harmonised standards have been
used:
•
EN 62841-1 EN 62841-2-1; EN 55014-1; EN
55014-2; IEC 62321-3-1; IEC 62321-4; IEC
62321-5; IEC 62321-6; IEC 62321-7-1; IEC
62321-7-2; IEC 62321-8
Place, date: Weiterstadt,
07.07.2023
7
Drill Driver
DDM406
See product rating label
See product rating label
Signature: Ted Qu,
Quality Director
EN
