FUXTEC FX-KS226 Manual De Instrucciones página 53

MODE D´EMPLOI ORIGINAL FUXTEC FX-KS226_de_en_fr_ita_rev02
Switching off the engine
• Release the throttle lever
• Set ignition switch to [0].
The engine switches off.
DANGER!
Danger of injury!
The throttle stick must be pressed lightly once after starting, so that the
engine reaches the correct idle speed and the saw-chain does not start up in
idle speed.
Hint:
Pull the pull starter with the choke lever pulled only until the first ignition
noise is heard. Otherwise there is a risk that too much fuel will enter the
combustion chamber and no ignition spark can be produced.
NOTE:
Always drain the appliance before turning it off
53